High Pressure & Acetylene Cylinders
 

Acetylene Cylinders

The inner porous mass in every Taylor-Wharton Millennium acetylene cylinder is an environmentally-friendly formula of calcium-silicate, delivering a porosity of 88-92% - the highest allowed by U.S. and Canadian regulations.  Taylor-Wharton offers the world's most complete range of acetylene cylinder sizes and options, all produced within an ISO 9002 approved quality system.
 

PRICE SHEET

 

Acetylene diagram

 

Asbestos Free Millennium Acetylene Cylinders
Model DOT Spec Tapping Capacity Nominal Dimensions Acetone Weight (w/o cap) Ship weight Ship cube w/cap Ship cube w/o cap & valve
Acetylene Capacity Min H2O Capacity I.D. Wall Thickness Height w/o cap & valve Height w/cap & valve
  (cu ft.) (lbs) (cu. in) (lbs.) (in.) (in.) (in.) (in.) (lbs.) (lbs) (lbs.) (cu. ft.) (cu. ft.)
(cu. m.) (kgs.) (liters) (kgs.) (mm) (mm) (mm) (mm) (kgs.) (kgs.) (kgs.) (cu. m.) (cu. m.)
SM-10 DOT-8 3/8-18 NGT 10 .68 128 4.6 3.8 0.070 13.4 15.4 1.3 7.5 7.5 0.15 0.13
0.28 0.31 2.1 2.1 97.3 1.8 340.4 391.2 0.6 3.4 3.4 0.004 0.004
SM-40 DOT-8 3/8-18 NGT 40 2.7 480 17.3 6.0 0.092 19.8 23.2 5.1 23.4 23.4 0.51 0.43
1.1 1.2 7.9 7.8 152.4 2.3 502.9 589.3 2.3 10.6 10.6 0.014 0.012
SM-40 C&F DOT-8 3/4-14 NGT 40 2.7 480 17.3 6.0 0.092 20.0 25.25 5.1 26.5 26.4 0.56 0.44
1.1 1.2 7.9 7.8 152.4 2.3 508.0 641.4 2.3 12.0 12.0 0.016 0.012
SM-75 DOT-8 3/4-14 NGT 75 5.1 855 30.8 7.0 0.100 25.5 30.75 9.3 42.3 44.15 0.9 0.8
2.1 2.3 14.0 14.0 177.8 2.5 647.7 781.1 4.2 19.2 20.0 0.025 0.023
SM-145 DOT-8 3/4-14 NGT 145 9.9 1530 55.1 8.0 0.110 34.3 39.5 17.9 73.0 74.6 1.6 1.3
4.1 4.5 25.1 25.0 203.2 2.8 870.0 1003.3 8.1 33.1 33.8 0.045 0.037
WM-210 DOT-8 3/4-14 NGT 210 14.3 2185 78.7 10.0 0.130 32.6 37.85 25.9 98.6 99.8 2.3 2
5.9 6.5 35.8 35.7 254.0 3.3 828.0 961.4 11.7 44.7 45.3 0.065 0.057
WM-250 DOT-8 3/4 14 NGT 250 17.0 2668 96.1 10.0 0.135 38.0 43.25 30.8 117.0 118.3 2.6 2.3
7.1 7.7 43.7 43.6 254.0 3.4 965.2 1098.6 14.0 53.1 53.7 0.074 0.065
WM-310 DOT-8AL 3/4-14 NGT 310 21.1 3285 118.3 12.0 0.134 32.8 38.0 38.2 135.0 136.1 3.3 2.9
8.8 9.6 53.8 53.7 304.8 3.4 831.9 965.2 17.3 61.2 61.7 0.093 0.082
WM-397 DOT-8AL 3/4-14 NGT 397 27.0 4171 150.2 12.0 0.134 41.0 46.25 49.0 169.0 169.0 4 3.6
11.2 12.3 68.4 68.1 304.8 3.4 1041.4 1174.8 22.2 76.7 77.0 0.113 0.102
WM-420 DOT-8 3/4-14 NGT 420 28.6 4412 158.9 12.0 0.134 43.3 48.5 51.9 174.0 174.85 4.2 3.8
11.9 13.0 72.3 72.1 304.8 3.4 1098.6 1231.9 23.5 78.9 79.3 0.119 0.108
CSM-60 DOT-8 3/4-14 NGT 60 4.1 672 24.2 7.0 0.100   25.6* 7.5 42.1 41.8 0.68  
1.7 1.9 11.0 11.0 177.8 2.5   647.7 3.4 19.1 19.0 1.019  
CSM-140 DOT-8 3/4-14 NGT 140 9.5 1505 54.2 8.0 0.110   36.00* 17.3 70.7 70.2 1.5  
4.0 4.3 24.7 24.6 203.2 2.8   914.4 7.8 32.1 31.8 0.042  
CSM-397 DOT-8AL 3/4-14 NGT 397 27.0 4282 154.2 12.0 0.134   44.00* 49.0 170.0 168.7 4  
11.2 12.3 70.2 69.9 304.8 3.4   1117.6* 22.2 77.1 76.5 0.113  

- Dimensions - All weights and dimensions stated are NOMINAL unless otherwise indicated.
- Tapping - Alternate tapping available on request
- Capacity - Cylinder capacities are based upon commercial pure acetylene at 250 PSIG and 70 degrees Fahrenheit
- Shipping Weight - Shipping weight includes acetone, valve, approved fusible safety device and valve protection  cap (as required) but does not include gas or saturation gas allowance.
- Standard acetylene cylinders are dual marked for DOT and Transport Canada unless specified at time of order.
* Height with collar
** Models SM-10 and SM-40 are not equipped with valve protection cap except on special orders: heights and shipping cube specified include     valve but no cap.
For a copy of this page, please visit our literature section
Home Products Literature News FAQ
Bulk Tank Calc. Service Centers Contact Us Site Map Employment