|
|
|
|
| Female
End Fitting |
Hose
Length |
Male End
Fitting |
Part
Number |
| Nitrogen and Argon LIQUID and VENT
Connection |
|
CGA 295
CGA 295
|
4 ft. (1.2 m)
6 ft. (1.8 m) |
3/8 in.
NPT
3/8 in. NPT |
1700-9C65
1600-9C66 |
| Nitrogen
and Argon USE Connection |
| CGA
580 |
6 ft. (1.8
m) |
3/8
in. NPT |
GL50-8C51 |
| Oxygen
LIQUID or VENT Connection |
| CGA
440 |
6 ft. (1.8
m) |
3/8
in. NPT |
GL50-8C53 |
| Oxygen
USE Connection |
| CGA
540 |
6 ft. (1.8
m) |
3/8
in. NPT |
GL50-8C56 |
| Carbon
Dioxide LIQUID or VENT Connection |
| CGA
320 |
6 ft. (1.8
m) |
3/8
in. NPT |
HP50-8C51 |
| Carbon
Dioxide Gas VENT Connection |
CGA 295
CGA 295 |
4 ft. (1.2
m)
6 ft. (1.8 m |
3/8
in. NPT
3/8 in. NPT |
1700-9C65
1600-9C66 |
|
|
Transfer
Hoses
Transfer
hoses are constructed of a flexible stainless steel suitable for the
transfer of cryogenic fluids and are available in 4 ft. (1.2 m) or 6 ft.
(1.8 m) lengths. Hoses are fitted with a 3/8 in. NPT male fitting on
one end and a CGA female fitting on the other end.
|
|
|
|
|
Model |
Part
Number |
| 2
3/4 in. x 1 3/8 in. OD (3/8 in. NPT) (70 mm x 35 mm) |
1193-8C80 |
| 1
1/4 in. x 1 in. OD (3/8 in. NPT)
(32 mm x 35 mm) |
1193-8C82 |
| 1
1/4 in. x 1/2 OD (1/8 in. NPT)
(32 mm x
12.7 mm) |
1193-8C83 |
|
Cryogenic
Phase Separators
Designed
to minimize hazardous splashing and vaporization, phase separators
are available in three different sizes to accommodate transferring
liquids into various open containers. The two larger phase
separators are designed to fit 3/8 in. NPT end of Taylor-Wharton
transfer hose. Specify quantity and size or part number.
|
|
|
|
| Model |
Part
Number |
| External
Heat Exchanger |
VP50-7C10 |
|
External
Heat Exchanger
An External
Heat Exchanger (vaporizer) effectively increases the gaseous delivery rate
of any liquid cylinder by approximately 250 cfh (7.0 cu. m/h) air gases
and 120 cfh (3.4 cu. m/h) CO2 continuous at pressures up to 500 psig (34
bar/3447 kPa). The vaporizer is cleaned for oxygen service and comes
equipped with a 3/8 in NPT fitting to connect to a transfer hose
and regulator suited to your application. Dimensions - 12" x 15
3/4" x 46".
|
|
|
|
